Nissan logo

Nissan QR25DE Engine Specs

Nissan

Quick overview

Nissan QR25DE is a 2.5L (2488 cc) petrol engine with 175 HP, 244 Nm, 9.5:1 compression ratio. Fuel consumption: 8.0-11.5L/100km. Typical service life: 300,000 km km.

175
HP
2.5L (2488 cm³)
Displacement
244 Nm
Torque
Petrol
Fuel

Description

The Nissan QR25DE is a 2.5-liter inline-four petrol engine that Nissan introduced in 2001. It is a part of the QR family (QR20DE and QR25DE) and replaced the older KA24DE. It was used in the Altima, the Sentra, the X-Trail, the Rogue and the Teana, and it was built until about 2018 in a revised version. The QR25DE is Nissan's main four-cylinder petrol engine in this class and one of the most common Nissan engines in the world.

The QR25DE has an aluminum block with cast iron liners, an aluminum DOHC head with 16 valves, a timing chain and continuously variable valve timing (CVTC) on the intake. The bore is 89 mm and the stroke 100 mm, with a compression ratio of 9.5:1 (up to 10.0:1 on later versions). The engine has two balance shafts for smoother running, and later versions have a modified cylinder head and a revised intake system.

The power is 165 to 188 hp (121 to 138 kW) and 230 to 250 Nm of torque, depending on the version. Typical outputs are 175 hp (129 kW) and 244 Nm in the Altima, 170 hp in the Rogue and 177 hp in the Sentra SE-R. It works with a 5 or 6-speed manual or a 4-speed automatic or a CVT (Xtronic) and front-wheel drive or AWD. Real fuel consumption is about 8.5 to 11 liters per 100 km.

Alternative names are the QR25 engine and, in some markets, the 2.5 DOHC. The QR25DE is a solid engine, but it is known for oil consumption on early engines and for catalytic converter debris that can damage the cylinders. Check the oil level often and the service history on a used car.

General Information

Production Years: 2001-2018
Fuel Type: Petrol
Environmental Standards: Euro 3-5 / US LEV2
Fuel Consumption: 8.0-11.5L/100km (20.5-29.4 mpg)
Power (HP): 175
Power (kW): 129
Displacement: 2.5L (2488 cm³) (151.8 cu.in)
Torque: 244 Nm (180 lb-ft)
Cylinder Block Alloy: Aluminum alloy (cast iron sleeves)
Cylinder Head Alloy: Aluminum alloy
Has Turbo: No
Engine Layout: I4
Aspiration Type: Naturally Aspirated
Fuel System: Multipoint Port Injection
Head Type: DOHC with CVTC (continuously variable valve timing)
Timing Drive: Timing Chain
Cooling Type: Liquid Cooled
Engine Cycle: Otto
Cylinders Count: 4

Technical Details

Cylinder Diameter: 89.0mm
Piston Stroke: 100.0mm
Total Valves: 16
Intake Valves per Cylinder: 2
Exhaust Valves per Cylinder: 2
Firing Order: 1-3-4-2
Rings per Piston: 3 (2/1)
Compression Ratio: 9.5:1
Hydraulic Lifters: Yes
Cylinder Coating: Cast iron sleeve
Minimum Octane: 91

Maintenance

Oil Capacity: 4.9L (5.2 qts)
Recommended Oil: 5W-30 / 0W-20 (API SM)
Operating Temperature: 90-105°C (194-221°F)
Thermostat Temperature: 82°C (180°F)
Service Life (km): 300,000 km (186 miles)

Repair & Tuning

Tuning Potential: The QR25DE has limited tuning potential. An intake, header and a remap give about 10 to 20 hp, and a turbo kit is rare. Most owners keep it standard and focus on the maintenance of the rings and the catalytic converter.